Hospital operating table

(Main Usage & Structure)Main Usage: Electric operating table can be operated for clinical use.

b) Structure :Operating table consists of two parts: mechanical and electro-hydraulic control system. Depending on manual operation, the product can meet the requirement of posture in clinical operation.

二、Specifications

Dimension of table top：

Overall Length………………………………………………………2100mm

Width…………………………………………………………………500mm

Dimension of section：

Head Section……………………………………………………………250×500mm

Back Section………………………………………………………………545×500mm

Waist Section…………………………………………………………75×500mm

Seat section…………………………………………………………450×500mm

Leg Section……………………………………………………………600×240mm

Table top of from floor

Min Height…………………………………………………………750mm

Max Height……………………………………………………………1000mm

Adujst…………………………………………………………………………250mm

Range of movements：

Reversed Trendelenburg……………………………………………………………≥20°

Trendelenburg……………………………………………………………≥15°

Lateral Til………………………………………………………………≥15°

   Backward and Forward Movements…………………………………………≥250mm

Adjustment of sections：

Head Section Raised  from the horizontal………………………………………≥45°

Head Section lowered from the horizonta……………………………………≥90°

Back Section Raised from the horizontal……………………………………≥75°

Back Section Raised from the horizontal……………………………………≥30°

Leg Section Lowered from the horizontal……………………………………≥90°

Leg section opened………………………………………≥90°

Kidney Bridge Elevated……………………………………≥80mm

Lifting speed…………………………………………………………4～16mm/s

safe working load…………………………………………………135kg

  Device safety sortI     B

IPX4   Ingress Protection：IPX4

 220V，50Hz  Power：（AC）220V，50Hz

（DC）24V Internal electric source:（DC）24V

14AH   Battery capacity ≥ 2.4AH

Electric Operating Table is made up of the table top, the main part, the electric controlling part and the accessories, etc. It’s raising, lowering, lateral tilt, trendelenburg and reversed trendelenburg,backward and forward movements are all drived by the motors.
　　The table top is made up of head section, back section, seat section, leg section, foot section and kidney bridge. The head section and the foot section can all be disassembled. The head section can be raised or lowered from the horizontal. The leg section can be lowered from the horizontal and opened. The table top can be move backward and forward on the main if necessary. The distance of displacement is longer than 400mm. The table top is made of engineering plasties, thus X-ray examination of can be carried out on it.
　　The main part includes rotary frame, lateral tilt arrangements, trendelenburg and reversed trendelenburg arrangements, ascending and descending arrangements and the base. The lateral tilt arrangements trendelenburg and reversed trendelenburg arrangements can drive the rotary frams to carry out the lateral tilt, trendelenburg and reversed trendelenburg movements. Ascending and descending arrangements can drive the operating table to ascend or descend.
　　The electric controlling part is made up of steady power supple, controlling push button container. The power supply of the operating table is :connect with alternating current (220V AC), then change it into direct current (24V DC) to drive the motor starter to word.
　　Electric operating table mattresses are produced by the high-density sponge covered leatherette materials or overall bubble forming, with antistatic properties.
　　This product is equipped with emergency power supply, can automatically charge, When net power is off , the emergency power source can automatically jump to working condition. Emergency power has charging light. When the green light is bright, it means it is charging. After the power is sufficient, light turns off.
　　The ascending and descending movements, lateral tilt movements, reversed trendelenburg , trendelenburg movements and backward and forward movements of the table top are all electrically operated. It has a moving controlling push button container attached.
　　The controlling push button are all dot buttons, when the necessary button is rushed, the corresponding motor will work, when the button is not puessde, all movements stop.
　　1 Connect with power supply.
　　2 Push the corresponding buttons, the operating table can carry out the action.
　　3 The motion idler wheel is installed in the pedestal of the operating table, it can be locked to the ground when trampling the side pedal, it can move around when tramping the other side pedal.
　　4 Operate handle of head part, the kidney bridge can ascend or descend, head section raised from the horizontal and elevated.
　　5 Folds upward of back section are controlled by pressure springs and can be adjusted within adjusting range at any location. If you want to raise the back section, kidney bridge must be first rotated to the minimum height. Then pull the spanner with one hand and hold the spanner near the head tightly with the other hand  to control the angel of the back section’s rising. When the back section folds upward automatically to the needed location, loosen the spanner ,the back section will be fixed there. If you want to lower the back section , pull the spanner with one hand and hold the spanner near the head tightly and rotating it to the wanted location. Loosen the spanner and the back section will just be fixed there.
　　6 The Company will be able to provide circuit draws in accordance with users’ needs.

五、 (Accessories)：

Numberal order	Name of accessories	Number
1	Head section	1
2	Anaesthetic Screen	1
3	Body support	Large 1.smart 1
4	Shoulder support	2
5	Arm rest	2
6	Knee crutch	2
7	Cushion	1
8	Body Restraint Strap	1	Optional